Who enforces kitchen hood suppression: Houston or Harris County?
Restaurants inside the City of Houston answer to the Houston Fire Department's Fire Marshal's Office, whose LSB Standard No. 02 sets the six-month hood suppression interval. A restaurant in a strip center along FM 1960, Highway 6 or the Katy area may instead be in unincorporated Harris County, where the Harris County Fire Marshal's Office (HCFMO) is the AHJ. HCFMO's FAQ explains how to check: search the address in the Harris County address search, and if the Law Juris column says "sheriff", the site is unincorporated. Cities such as Pasadena, Humble or League City have their own fire marshal, and the City of Houston Health Department's food permit does not tell you which fire marshal applies.
In HCFMO's jurisdiction, every service provider who inspects or tests fire protection systems must register with The Compliance Engine and submit all test, inspection and service reports there, on the schedule in the adopted fire code. The contractor files and pays the filing fee, not the owner. HCFMO tracks commercial kitchen hood suppression and commercial kitchen exhaust cleaning as separate systems, so both reports go in.
How often a kitchen suppression system needs inspection
- Every 6 months at minimum, with a new service tag (LSB 02 §2.9.1).
- After any activation or discharge of the system, before cooking resumes under it.
- Class K portable extinguishers in the kitchen: inspected, tested and tagged annually (LSB 02 §2.9.2).
- Hoods, ducts, exhaust fans and appurtenances: cleaned and inspected as often as needed to prevent excess grease (LSB 02 §2.9.1). This is a separate service from the suppression inspection; see kitchen hood cleaning.
- Other fixed wet or dry chemical systems on process hazards (spray booths, lab hoods): actuating test and service tag every 6 months (LSB 02 §2.9.3, §2.9.4).
Texas license required for hood suppression service
Kitchen suppression systems fall under the State Fire Marshal's Office extinguisher rules (28 TAC ch. 34, subchapter E). The company needs a Fire Extinguisher Certificate of Registration (ECR). An ECR alone does not tell you what its staff may do: a Type K (FEL-K) licensee may install, certify and service pre-engineered fixed systems that protect cooking areas, plus portables; a Type A (FEL-A) licensee may do the same for all pre-engineered fixed systems; a Type PL (EPL) licensee may also plan fixed systems. A Type B (FEL-B) license covers portables only and does not cover a hood system.
When you compare bids, ask which licensee will sign the tag and confirm the license type in the TDI/SFMO licensee search.
What a semiannual hood suppression inspection covers
Expect the technician to work through the manufacturer's inspection procedure, including:
- Confirming the system is listed to UL 300 and that the nozzle layout still matches the appliances under the hood; moved or added fryers and griddles are a common finding.
- Replacing fusible links on the schedule the manufacturer requires and checking detection line, pulleys and conduit.
- Checking the agent cylinder pressure or weight, and the expellant cartridge, hydrostatic dates and seals.
- Inspecting nozzles for grease, blow-off caps and aim.
- Testing the manual pull station and the automatic actuation without discharging the agent.
- Verifying gas or electric fuel shutoff to the cooking appliances on actuation, and alarm panel interconnection where present.
- Attaching the new service tag and listing deficiencies separately from routine findings.
Coordinating suppression, hood cleaning and Class K service
A restaurant usually has three separate fire services on the cook line: the hood suppression inspection every six months, exhaust hood and duct cleaning at the frequency the grease load requires, and annual Class K extinguisher service. Scheduling the suppression inspection after the hood cleaning lets the technician see clean nozzles and detection, and lets a cleaning crew's covered or bagged nozzles be checked before cooking resumes.
Tell the suppression company about any new or moved appliance before the visit. Nozzle coverage is designed around specific appliances and positions, so a fryer added under the hood can require nozzle changes before the system will pass.
Records a Houston restaurant should keep
Keep each semiannual inspection report, the service tag history, and any red-tag notice and correction record. Inside the City of Houston, LSB 02 §2.3.5 requires inspection, testing, maintenance and repair records to be kept for at least three years and shown to the fire code official on request. Insurers often ask for the same records at renewal.
FireMarket's free restaurant compliance calendar tracks the six-month suppression due date along with hood cleaning and grease trap service, sends reminders, and stores uploaded reports in a proof packet you can share by a revocable link. FireMarket does not file the reports with HFD, HCFMO or any AHJ.
What the hood system tag means
The service tag shows the date, the firm's registration number and the licensee who certified the work. If an impairment makes the system unsafe or inoperable, the firm must red tag it, notify the owner immediately and the local AHJ within 24 hours, and send the AHJ a copy of the written notice within three business days (28 TAC §34.521). Do not cook under a red-tagged hood until the system is corrected, re-inspected and service tagged.
Because Texas requires UL 300 compliance, a pre-UL 300 dry chemical hood system will not pass. Plan replacement with the restaurant's landlord and insurer before the inspection rather than after.
What affects the cost of hood suppression inspection
FireMarket does not publish prices. Bids vary with:
- Number of hoods, tanks and nozzles, and the system manufacturer.
- Fusible links, cartridges or caps that are due for replacement.
- Appliance changes that require nozzle relocation or a system redesign.
- Class K extinguishers serviced on the same visit.
- Off-hours scheduling so the kitchen does not lose service.
- Reporting: HCFMO jurisdiction requires a Compliance Engine filing by the contractor.