Who enforces backflow testing in Houston and the suburbs
Backflow testing is a water-system rule, not a fire marshal rule. Inside the City of Houston water system, Houston Public Works' Cross Connection Control Program (CCCP) requires installation, maintenance and annual testing of backflow prevention assemblies on cross connections, under state rules and the City of Houston Plumbing Code. The CCCP warns that failing to comply can bring citations with fines of up to $2,000 per day and possible suspension of water service.
Outside the City's water system, for example in a municipal utility district in unincorporated Harris, Fort Bend or Montgomery County, your public water system runs its own cross-connection program, often with its own tester registration and report portal. TCEQ notes that many public water systems run their own programs. Ask your water provider which tester list and report system it uses. The fire marshal (HFD or HCFMO) still regulates the sprinkler system on the other side of the assembly.
How often backflow assemblies must be tested
Houston Public Works states all four in its program requirements. The sprinkler contractor's annual NFPA 25 visit and the backflow test are separate tests with separate reports; many owners schedule them together to keep the fire line out of service only once.
- At installation, before the assembly is put in service.
- After any repair or relocation.
- At least once every year after that.
- Again after a failed test: the site stays out of compliance until a passing report is submitted.
License and registration required for backflow testing
The individual tester needs a Backflow Prevention Assembly Tester (BPAT) license from the Texas Commission on Environmental Quality. TCEQ requires a 40-hour approved course, an exam, and two years of qualifying experience, and the license renews every three years with 24 hours of continuing education. BPATs may test and repair assemblies on domestic, commercial, industrial and irrigation services.
Fire lines are different. TCEQ says a BPAT may test and repair assemblies on fire lines only if permanently employed by an approved fire line contractor, and Houston Public Works says the same: only testers employed by a State of Texas approved fire line contractor may test and fix assemblies on fire lines, and those companies are highlighted in red on the City's tester list. In practice, ask for both the tester's TCEQ BPAT license and the company's TDI/SFMO sprinkler registration (SCR-General or SCR-Underground).
To test in the City of Houston, the tester also needs City approval: a current TCEQ BPAT license plus an approved City of Houston Backflow Prevention Assembly Tester application. The City's company list is updated monthly. Test gauges must be accuracy-tested every year, and the calibration report is filed with the CCCP.
Fire line, domestic and irrigation assemblies
Most commercial properties have more than one assembly. The fire line assembly protects the public water supply from water that sits in sprinkler piping, and in Texas only a tester working for an approved fire line contractor may test or repair it. Domestic and irrigation assemblies can be tested by any TCEQ-licensed BPAT who meets the water system's requirements. The type of assembly required at each connection depends on the hazard, so the tester should record which assembly protects which connection.
Houston Public Works also notes that an assembly at the service line is extra protection: it does not replace backflow protection required at internal hazards inside the building. If a renovation removed or duplicated an assembly, send the City the removal form so its records match what is installed.
What to ask before you award a backflow job
- The tester's name and TCEQ BPAT license number, and that the company appears on the current Houston CCCP tester list (or your water district's list).
- For a fire line: the company's TDI/SFMO sprinkler registration, and confirmation that the tester is a permanent employee of that company.
- The calibration date of the test gauge they will use.
- Who uploads the report and pays the filing fee, and when you will get a copy.
- How they will coordinate the fire line outage with your alarm monitoring company and building occupants.
- A separate price for repair kits or replacement if the assembly fails.
What a backflow test covers
A tester working on a fire line double check or reduced pressure assembly should:
- Coordinate the impairment: the fire line is out of service during the test, so the alarm company, monitoring station and, inside Houston, HFD Office of Emergency Communications (713-884-3143) may need notice if the system is taken out of service for unscheduled work.
- Close the shutoff valves, attach a calibrated gauge, and test each check valve and relief valve against the assembly's required values.
- Record the assembly make, model, size and serial number, the gauge serial number and calibration date, and pass or fail results.
- Restore the valves to open and supervised, and confirm tamper and flow signals at the alarm panel.
- Complete the TCEQ Backflow Prevention Assembly Test and Maintenance Report and submit it to the water system.
How the test report reaches the City
For the City of Houston, the testing company uploads results into the City's third-party system, SwiftComply, and pays the associated fee so the site gets credit. Keep a copy of every test report on site. If an assembly was removed or replaced, the plumber, engineer or testing company emails the City's Backflow Prevention Assembly Removal Form. FireMarket does not submit backflow reports to Houston Public Works or any water system.
What affects the cost of backflow testing
FireMarket does not publish prices. Bids depend on:
- Number, size and type of assemblies (double check, reduced pressure, detector assemblies) on fire, domestic and irrigation lines.
- Whether the fire line test is combined with the annual sprinkler inspection.
- Vault or pit access, confined-space requirements and valve condition.
- Repair kits or replacement if the assembly fails, which should be quoted separately.
- The water system's report filing fee.